详情请进入 湖南阳光电子学校 已关注:人 咨询电话:0731-85579057 微信号:yp941688, yp94168
激光热丝焊热输入小,瓦锡兰电气故障,家电深度清洗广告词,填丝效率高,未来十年家电维修前景,家用电器维修技术免费下载,电子维修需要哪些工具,焊缝熔合比小,附近的家用电器维修点,乐宜嘉热水器维修,家电维修管理软件,北京容声冰箱售后维修电话,特别适合于表面堆焊及厚板的窄间隙焊接,电动牙刷维修点,如何获得稳定的焊丝过渡是其关键问题。采用高速摄像观察了不同工艺参数下的焊丝过渡行为,velchl变频器说明书,南京蒸箱维修咨询电话,将其分为滴状过渡、熔断过渡、连续过渡、顶丝过渡4种类型,金灶k9电茶壶维修视频,连续过渡是稳定的焊丝过渡,蒸箱气不足怎么回事,是获得良好焊缝成形的前提。不同焊丝过渡行为的区别表现为焊丝熔化位置不同,附近哪有家电维修,附近哪有修小家电的,这是由焊丝获得热量的大小不同所导致的。获得稳定焊丝过渡的工艺控制原则是:电阻热小于焊丝熔化热,吸引顾客修车的广告语,且电阻热与熔池传热之和大于焊丝熔化热。通过理论推导对熔池外焊丝温度进行了计算,维修电工五十条小技巧,发现当电阻热将熔池外焊丝加热至接近熔点时,家电维修转行成功实例,电器故障维修,怎么接电器售后代理,附近家电上门维修电话,有利于获得稳定的焊丝过渡。
关键词
Abstract
With advantages of low heat input, high feeding efficiency and low penetration ratio, laser hot wire welding is fit for surfacing and joining thick plate. How to obtain the stable wire transfer is the key problem for laser hot wire welding. High speed imaging is used to observe wire transfer behavior under different welding parameters, which are divided into four kinds: drop transfer, fusing transfer, continuous transfer and wire hit transfer. The continuous transfer is the stable wire transfer and it is the assurance of good weld formation. The differences among the four wire transfer kinds show that the different wire fusion positions are decided by the wire heat. Therefore, the control principles to obtain the stable wire transfer are that wire fusion heat is larger than the resistance heat, and smaller than the total of the resistance heat and the conduct heat from the molten pool to the wire. The temperature of the wire outside the molten pool is calculated. It is found that it is beneficial to obtain the stable wire transfer when the wire temperature is close to the wire fusion point.
补充资料
中图分类号:TG456.7
DOI:10.3788/cjl201441.0403008
所属栏目:激光制造
责任编辑:宋梅梅 信息反馈
基金项目:国家自然科学基金(51005125)、国家“973”计划(2011CB013404)
收稿日期:2013-09-05
修改稿日期:2013-11-24
网络出版日期:--
作者单位 点击查看
郑世卿:清华大学机械工程系, 北京 100084
温鹏:清华大学机械工程系, 北京 100084先进成形制造教育部重点实验室, 北京 100084
单际国:清华大学机械工程系, 北京 100084先进成形制造教育部重点实验室, 北京 100084
联系人作者:郑世卿(tangss2@163.com)
备注:郑世卿(1985—),机床电气控制原理图,男,汽车维修宣传语,工厂电工设备维修案例,上门维修电工收费,博士研究生,上门维修电工收费,主要从事激光焊接方面的研究。
【1】Wu Shikai, Xiao Rongshi, Chen Kai. Laser welding of heavy section stainless steel plants[J]. Chinese J Lasers, 2009, 36(9): 2422-2425.
吴世凯, 肖荣诗, 陈恺. 大厚度不锈钢板的激光焊接[J]. 中国激光, 2009, 36(9): 2422-2425.
【2】Wang Baiping, Zhao Yong, Huang Jian. Investigation on microstructure of thick plate stainless steel joint welded by multi-pass laser welding with filler wire[J]. Chinese J Lasers, 2013, 40(2): 0203008.
王柏平, 赵勇, 黄坚. 厚板不锈钢激光填丝多道焊的接头组织分析[J]. 中国激光, 2013, 40(2): 0203008.
【3】U Dilthey, S Bohm, G Trager, et al.. Laser-beam and electron-beam welding of material combinations consisting of cast iron and case-hardening or heat-treatable steels[J]. Welding and Cutting, 1998, 50(7): 214-216.
【4】T Jokinen, M Karhu, V Kujanp. Welding of thick austenitic stainless steel using NdYAG laser with filler wire and hybrid process[C]. Laser Institute of America, 2002. 1-10.
【5】A Salminen. The filler wire-laser beam interaction during laser welding with low alloyed steel filler wire[J]. Mechanika, 2010, 84(4): 67-74.
【6】Salminen Antti. The effects of filler wire feed on the efficiency of laser welding[C]. SPIE, 2003, 4831: 263-268.
【7】Janne Nurminen, Jouko Riihimki, Jonne Nkki. Comparison of laser cladding with powder and hot and cold wire techniques[C]. ICALEO, 2006. 634-637.
【8】Janne Nurminen, Jouko Riihimki, Jonne Nkki. Hot-wire cladding process studies[C]. ICALEO, 2007. 947-952.
【9】Xiao Rongshi, Zuo Tiechuan, Günter Ambrosy. Investigation on current enhanced CO2 laser welding of aluminum[J]. Chinese J Lasers, 2004, 31(3): 359-362.
肖荣诗, 左铁钏, Günter Ambrosy. 电流强化铝合金CO2激光焊接[J]. 中国激光, 2004, 31(3): 359-362.
【10】Ohnishi Terumasa, Kawahito Yousuke, Katayama Seiji. High-power and high-brightness laser butt welding with using hot wire for thick high-strength steel plate[J]. Quarterly Journal of the Japan Welding Society, 2011, 29(1): 41-47.
【11】Li Liqun, Tao Wang, Zhu Xianliang. Wire filling multilayer welding of high strength steel thick plate[J]. Chinese J Lasers, 2009, 36(5): 1251-1255.
李俐群, 陶汪, 朱先亮. 厚板高强钢激光填丝多层焊工艺[J]. 中国激光, 2009, 36(5): 1251-1255.
【12】Yu Yangchun. Study on the Technology and Filler Wire Melting Dynamics during the Laser Welding with Filler Wire[D]. Wuhan: Huazhong University of Science and Technology, 2010.
余阳春. 激光填丝焊焊丝熔入行为及工艺研究[D]. 武汉: 华中科技大学, 2010.
(整理:婺城泥瓦工培训学校)
湖南阳光电子学校教学特色